Received my panel back getting it labled from Stein and am really happy with it. They did a nice job and were great to work with. Looking forward to populating it with the avionics and start the wiring. I finally secured all the wiring coming up from the back of the fuselage and the wiring from the wings (Magnetometer, nav lights, landing lights and pitot heat). Built a cross beam to secure the wiring to which will keep it clear of the tension rollers for the rudder cables as well as away from the two fuel lines going to the firewall feed through. Attached the trim tab to the rudder. Might have to make this a bit larger but decided this is my starting point. Will zero on on the size once we start flying. Last but not least, I mounted the brakes and tires to the struts. All these little things I wanted done before I actually start wiring.